Posts by admin

Black Smoke Coming Out Of Your Tailpipe? Find Out Why

Posted by on Feb 4, 2016 in Uncategorized |

Your expect your car to run perfectly, but sometimes issues arise, like black smoke coming out of your tailpipe. This could signify all kinds of issues that this guide might help you uncover, and you’ll learn about one possible solution. What is The Smoke? The black smoke coming out of your tailpipe is fuel that your engine could not burn during combustion. This means that the engine (or other parts) of your vehicle is causing your fuel pump to push out more gasoline than needed. What Could Be Causing The Rich-Fuel Issue? The following are possible issues related to an engine that is running rich: The problem could be a clogged fuel return line that is not allowing your engine to return the unnecessary gasoline. Your fuel injectors might be going out, especially if you haven’t had a tune up lately. The air filter might be clogged, or you might need to replace the filter with a new filter. These are just some of the possible reasons you are seeing black smoke coming from your exhaust, but there are other possibilities, like a bad fuel pressure regulator. How To Tell If the Problem Is Your Fuel Pressure Regulator? The first thing you can do is simply talk to an auto care specialist, like Allan’s Alignment & Frame Service (1989) Ltd auto repair, before dealing with your fuel pressure regulator, as he or she can confirm your suspicions. Or you can try to figure it out on your own. The following are other symptoms that are usually connected to a bad pressure regulator: The spark plugs look black because the extra fuel is contaminating other areas in your vehicle. Your car might start to run a little erratically at times. Your vehicle does not start as it normally would, or the car stalls on you. The oil dipstick smells like gasoline. Talk to your auto care specialist if you notice any of the aforementioned signs so that he or she can help you fix the problem. Replacing Your Own Fuel Pressure Regulator Follow the steps below: Park in a safe location that is leveled and away from traffic. Let the vehicle cool so that you can work on it safely. Use your owner’s manual to find and disconnect the fuel pump relay from the fuse box. Disconnect the red or negative line from our battery; this is for your protection. Use the owner’s manual to find the fuel pressure regulator, which usually looks like a hexagon and sits on the driver’s side. Disconnect the lines leading up to the regulator and the electrical-like plug. Remove the screws using your socket and wrench tool. Replace with your new regulator, and reconnect all the necessary lines and electrical plugs. Reconnect your fuel pump relay, followed by your battery, and you are done. Hopefully taking care of this black smoke problem is more manageable now that you have a little more...

Read More

How To Keep Vehicle Repair Costs Down

Posted by on Oct 7, 2015 in Uncategorized |

If your vehicle has outlived its manufacturers warranty, you might end up facing auto repair charges that you’ll need to pay on your own. However, just because the warranty runs out on your vehicle doesn’t mean that it’s time to run out and purchase a new car. Auto repair professionals want to help you keep your vehicle running in tip-top shape, and they are honest in their methods and ways of doing so. However, there are some things that you can do on your own when you take your vehicle to the shop to keep your costs down. Don’t Ask Additional Questions While asking the right questions is key to keeping car repair prices down, asking the wrong questions can be detrimental to your budget. Questions such as “Do you think I need to change these tires?” or “What else needs to be fixed?” are telltale signs to your mechanic that you do not know about the current state of your car. Although rare, he or she can suggest repairs and parts that may not be necessary without you knowing the difference. To avoid asking the wrong questions, find out what your cars scheduled maintenance service should be. You can find this informationin your owner’s manual. The right questions to ask are usually the ones that make your mechanic give an exact answer and explanation of his or her services and charges. If you’re dropping your car off for repairs, ask exactly what repairs will happen while you’re gone. This prevents you from coming back to some unexpected work and unexpected charges. You can also ask for an itemized estimate with every charge and fee listed for your approval before you leave your vehicle with that particular shop. Ask For Aftermarket Parts Paying for parts can get costly, especially when you’re buying brand new, factory-issued parts made specifically for your car. To keep the cost of your repair down, ask the mechanic about aftermarket parts. These parts are made to work in multiple makes and models of cars. Generally, aftermarket parts can save you money. Your mechanic shop may have a policy to default to the newest, most expensive part. Remember, you can always request alternate options! Request That Only Work Needed Be Done Have you ever felt like you brought your car to the mechanic for one issue, and leave with five more issues to worry about? This is because cars are heavily used machines that eventually wear down. But not every issue requires immediate attention. Even though your mechanic may notify you of an issue like dirty brakes or low fluid, that issue may not be urgent to your safety or to your car’s functioning. Request that only the most important work be done. As you get to know a mechanic like Action Tire Centre, you’ll likely return to one that you trust and takes good care of your vehicle. This is the desired relationship that your mechanic wants to have with you, so trust them when...

Read More

What Happens When Your Get Your Vehicle’s Air Conditioning Serviced

Posted by on Oct 6, 2015 in Uncategorized |

During the summer months, it is not uncommon to see just about every auto shop and oil change shop in the area advertising air conditioning service. Here is what should happen when you take your vehicle in to get the air condition system checked and serviced: Pressure Test The first thing a service technician will do when you bring your vehicle in for an air conditioning check is to test out your pressure. They will check the air pressure running through air conditioning system. This reading will let them know if your system is blowing out the right amount of air. If your system has a low-pressure reading, the service technician will then examine the pipes and hoses in your system to see if there is a leak or if any of them have become disconnected and just need to be reattached. Refrigerant Charge Next, the service technician will check the charge on your refrigerant. The refrigerant is the liquid that runs through your air conditioning system. It helps cool off the air that your vehicle pulls in. Refrigerant does not last forever; over time, it can lose its charge and thus lose its effectiveness. If your refrigerant is below the recommended charge for your vehicle, the service technician working on your vehicle will drain out the old refrigerant and replace it with new refrigerant. This is not something that typically has to be done on a regular basis; it is generally done a couple of times over the life of your vehicle. Outlet Temperature Finally, the service technician will check the temperature of the air coming out of your outlets. This is another easy way to identify issues. If the air is too hot, generally your refrigerant needs changed. If the air is too cold, the technician may need to adjust a few settings and fix or replace the internal thermometer so the air temperature is regulated correctly. Belt Check Finally, the service technician will check the air compressor’s drive belt and make sure that it is set to the right tension level. It the tension is too loose, the belt could fall off, and if it is too tight, the belt could snap or break. If the level is off, the service technician will adjust it to get the right tension level for your vehicle. When you get your vehicle’s air conditioner serviced, the technician should check the four items listed above. When the service technician goes over what they did during your air condition check-up, make sure they address the four issues above. That way, you will know that your air conditioning system was checked out thoroughly.  For professional services, do an online search such as North York auto care. ...

Read More

How To Remove Paint From A Car

Posted by on Oct 5, 2015 in Uncategorized |

Extremely minor collisions, or simply rubbing up against another vehicle, can cause paint to transfer onto your car. When this happens, your car’s aesthetic is ruined, and there is a large unsightly mark that stands out from the rest of your vehicle’s paint job. Instead of simply painting over the area, you can remove the paint that has rubbed off onto your car. This is a fairly simple process that you can do at home with the right tools Before You Begin You’ll need a sponge, a bucket of warm soapy water, several soft cloths, car wax, and lacquer thinner. All of these items can be found at most hardware or automotive stores if you do not have them already at home. Removing Paint from a Car Clean the affected area thoroughly with the sponge soaked in soapy water. This removes any dirt and contaminants, making it easier for the lacquer thinner to work, and preventing any scratches to your paint job. Dry the area off with a soft cloth. Then, apply a small amount of lacquer thinner to the cloth (not to the car itself – this can cause damage to the paint job if the lacquer thinner is allowed to sit). Gently rub the cloth into the area that has paint stuck on it in a circular motion, taking care to not rub too much on the rest of the vehicle. You should see paint start to come off onto the cloth. You may need to reapply the lacquer thinner several times until the paint is completely removed from your vehicle. Do not increase the strength that you are scrubbing with, but simply continue gently rubbing with clean sections of the cloth until it is completely removed. Once the paint has been removed, use a damp cloth to wipe away any remaining lacquer thinner to prevent it from eating away at the paint job. Then, go over it with the sponge soaked in soapy water once more to ensure that the area is totally clean. Dry the area with a dry cloth, and double check the area. If there is no remaining paint, you can simply apply wax and buff the area so that it shines like new. If there are still small spots of paint remaining, reapply the lacquer thinner to a dry cloth and repeat the process until the entirety of the area is free from transferred paint. For professional help, contact a local auto body...

Read More

Check Engine Light: 4 Places In Your Vehicle To Examine

Posted by on Sep 25, 2015 in Uncategorized |

You are driving along one day and suddenly you notice that the check engine light comes on. It seems to have come on out of nowhere. Even worse, you don’t know what is causing it to light up. Frantic, you begin thinking about the worst possibilities. Does this sound familiar? If so, you’re not alone. Many people wonder why a check engine light would appear—especially without any warning. Don’t worry, a quick trip to an auto repair shop will ease your mind and you will know what is causing it. In the meantime, check these parts for issues: 1. Oxygen Sensor One reason your check engine light is on is because of a bad oxygen sensor. The oxygen sensor is small part in your vehicle that monitors the oxygen and exhaust levels. It also monitors how the oxygen in your car is burned. When it stops producing any numbers—or numbers that are way off—it can cause the check engine light in your vehicle to appear. The oxygen sensor is sturdy, but it might fail due to debris buildup. 2. Gas Cap Another reason that pesky light might come on is due to issues in your gas cap. If it is loose or broken, the light will usually appear to notify you. Although it’s not a huge problem, it can cause issues due to vapor leakage. Fortunately, this is an easy problem to fix. If it is cracked, purchase a new one. If not, just make sure to screw it on tighter. 3. Alarm System You might also see the light when there is a problem with your alarm system. This usually occurs with “aftermarket” parts, which don’t necessarily belong in your vehicle. The light might be on due to a bad wire connection or faulty parts. Again, this is easy to fix. Check the wires and tighten them. If that doesn’t fix it, try re-installing it. Finally, replace the parts if needed. 4. Battery Finally, you might also notice the light if you have a dead battery. However, it might also appear due to problems with your battery or charging system. If you’re like most people, you probably use your car battery a lot: to run the vehicle, use lights, and charge cell phones or other items. If your battery gets low or stops working altogether, your check engine light might appear. To fix it, charge your battery or replace it. There are many reasons your check engine light might appear; these are just four common ones. If your check engine light is on, take your vehicle to an auto repair shop such as Accurate Transmission & Auto Centre Ltd car maintenance to find out why—and to fix...

Read More